- Touch Screen Display – big 8.5” monitor for easy navigation and operation
- Smart Pin – Now you can measure the amount of excess weight being carried by the gauge wheels so you can finally manage downforce and reduce sidewall compaction. By measuring the weight transfering to guage wheels, you can tell if the planter is at full planting depth . . . and if you could remove weight (reducing sidewall compaction) and still maintain depth. White and Kinze Planters will use a smart link instead of a pin.
- Smart Pin Installation – just remove a pin in the depth adjustment linkage on three of your rows and replace it with this Smart Pin. For White planters and some Kinze planters, you will recive a replacement link rather than a pin.
- Smart Connector – the brains behind the system . . . simply mount it on the frame of the planter and plug it in between your existing 37-Pin connector. The Smart Connector intercepts the information coming from the seed tubes and process it into more valuable management information.
- Row Unit Module – here is the accelerometer and processor for down force. Just bolt this to the rows with the Smart Pin. Now you can watch how smooth or rough your row units are riding and see the impact this ride is having on seed spacing.
Correct errors before they cost you a penny with 20/20.
Fast Installation.
Installation on most planters will take less than two hours. After five minutes of in-cab set up, you are ready to plant – with more information than you have ever had before. Planters equipped with KPM II and KPM III monitors will require additional sensors and harness. View our installation instructions to see all the details.
Additional equipment required for Kinze 3000 Series planter owners.
Special installation information for Kinze KPM II and KPM III planter owners: click here to learn about additional equipment needed for your Kinze planter .