Quick Links
20/20 Owners: Here is the place to come to check for updates and information about your 20/20 system.
20/20 Owner Operation Workshop
Follow the link below to see a recording of our WebEx training seminar.
Computer Set Up Tool -- Version 1.0.15 (April 22, 2008)
A new version of the Setup Tool is now available . It includes enhancements to the previous version. Click on this link to download the software you need to input your field data, hybrid information and more.
Click Here for the PC Set Up Tool Download New version -- 1.0.15
Enhancements included in this version include:
- Fix for problem with "Invalid File Format"
- Support for multiple hybrid entries with the same name. (As long as Lot Number is unique)
- Auto-fill Hybrid “Rows” option in Hybrid 2 once Hybrid 1 “Rows” has been selected.
- Does not allow two crops to have the same name.
- Selecting File | New now gives correct Row Spacing values.
The new version is 1.0.15, which can be viewed by selecting the “Help | About” menu.
20/20 Display Software -- New Version Released May 7, 2008
The latest version is 2.3.26. You can verify the version currently on your display by pressing “SETUP | System Status | Device Status”
Click below to download the version 2.3.26 and follow the instructions.
Download Version 2.3.26 (May 7, 2008) of Display Software
- Click on the link, and SAVE to a USB flash drive.
- Insert the flash drive into a USB port on the left side of the Display Unit. (have unit turned OFF)
- Turn ON the Display Unit. The unit will automatically update, and will display scrolling white text on black background.
- When update is complete, the Display Unit will say “Update Complete. Please remove USB key and cycle power”.
- Turn ON the Display Unit. It will take around 5 minutes to boot the first time, so be patient.
New Content Includes:
- Warning for user if down force sensors are missing.
- Added High/Low down force averages to dashboard and in the configuration option in Display Setup.
- Improved accuracy of the Ground Contact and Margin readings.
- Improved touchscreen response to prevent accidentally typing 2 characters with a single press.
- Improved acres counter on the dashboard.
Previous Version Information
April 29, 2008 Software release:
Version 2.3.18 includes the following new features and updates:
- Improved accuracy of reported Pass Summary downforce data. (Previous versions were showing low Ground Contact in some conditions)
- Fixed bug that caused live seed data to disappear in some cases after running for long periods of time.
- Added support for RTK GPS receivers
- Improved detection algorithm for situation when all rows fail at once.
- Improved automatic re-zeroing algorithm to handle cases where user did not perform a manual re-zero before initial planting.
April 2, 2008 Software release:
Version 2.3.13 includes the following new features and updates:
Features
- Added “Unstable” warning to speed display to notify user if GPS data is unreliable
- Added support for Great Plains planters
- Updated 20/20 Advice & Recommendations
- Added “Effective Planter Width” to allow accurate acre counting for non-standard planter configurations
- Improved row fail logic to detect condition where all rows have failed due to loss of vacuum or drive system
- Eliminated low speaker “buzz” that was occurring on some Display Units
- Added several cosmetic enhancements, such as displaying “—“ instead of “n/a” when data is not available
Feature Enhancements
- Corrected a problem where the automatic backlight control would incorrectly set brightness to 100% in some low-light conditions
- Corrected issue that would cause screen to freeze or reboot in rare cases
- Corrected issue that showed “no data” when entering FieldMap Transfer page for the first time
- Corrected issue that would sometimes initiate touchscreen calibration when entering Demo Mode
Version 2.2.04
This version included the following new features and updates compared to the earlier version which was 2.1.19:
- Automatic backlight control
- Improved data entry for Hybrids
- Improved data entry for Fields
- Improved touchscreen calibration text
- Added legend display to System Status page
- Added new sounds for Alarm, Alert, and Keypress
- Added support for positive air pressure sensors
- Set New Field as Active immediately after creating it
- Issues Resolved:
Fixed issue that caused some RUMs to show up as yellow in System Status - Fixed issue that sometimes unnecessarily re-programmed RUMs after Reset
Warranty Kit Locator