BullsEye Seed Installation Instructions

Download the full details for BullsEye Seed Installation.

• Step one: Remove the old seed tube from the row unit. Cut the zip ties that are holding the sensor to the tube.
• Step two: Position the sensor onto the bulleye seed tube in the same position and direction that it was on the old tube. Use the zip ties provided with the new seed tube to secure the sensor to the seed tube.
• Step three: Make sure that the area around the pin that the seed tube hooks over is clean of dirt and debris. Install the Bullseye Seed Tube back into the row unit making sure that the hook is hooked over the pin. Secure the tube with the same pin and clip that held the old tube in place.